Enable - Dell S4810 Reference Manual

To return to the default setting, use the no aaa authentication role-only
command.
Parameters
name
inherit existing-
role-name
Defaults none
Command CONFIGURATION
Modes
Command
Version 9.5.
History
(0.0)
Usage
By default, access to commands are determined by the user's role (if defined) or by
Information
the user's privilege level. If the aaa authorization role-only command is
enabled, then only the user's role is used.
Before you enable role-based only AAA authorization:
1.
2.
3.
4.
5.
Related login authentication, password, radius-server host, tacacs-server host
Commands

enable

Enter EXEC Privilege mode or any other privilege level configured. After entering this command, you may
need to enter a password.
S4810
Syntax
enable [level]
Parameters
level
Security
Enter a text string for the name of the user up to 63
characters. It cannot be one of the system defined roles
(sysadmin, secadmin, netadmin, netoperator).
Enter the inherit keyword then specify the system defined
role to inherit permissions from (sysadmin, secadmin,
netadmin, netoperator).
Introduced on the Z9000, S6000, S4820T, S4810, MXL
Locally define a system administrator user role.This will give you access to
login with full permissions even if network connectivity to remote
authentication servers is not available.
Configure login authentication on the console. This ensures that all users are
properly identified through authentication no matter the access point
Specify an authentication method (RADIUS, TACACS+, or Local).
Specify authorization method (RADIUS, TACACS+ or Local).
Verify the configuration has been applied to the console or VTY line.
(OPTIONAL) Enter a number for a privilege level of Dell
Networking OS. The range is from 0 to 15.
1529