Dell S4810 Reference Manual page 639

Hide thumbs Also See for S4810:

Table of Contents

hg-seed seed-

value stack-

hashalgorithm

IPSA and IPDA mask value is FF for the stack-unit.

CONFIGURATION

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Version 8.3.11.1

Version 8.1.1.0

Version 7.8.1.0

Equal Cost Multi-Path (ECMP)

Enter the keywords port-set port-pipe then the port

pipe number. The range is from 0 to 5.

Z-Series only: Enter the keywords hg-seed then the hash

algorithm seed value. The range is from 0 to 2147483646.

Enter the keywords stack-unit then the stack unit number.

The range is from 0 to 7.

Enter the keywords port-set then the stack-unit port-pipe

number. The range is from 0 to 5.

Z-Series only: Enter the keywords hg-seed . The range is

from 0 to 47.

(OPTIONAL) Enter the keyword nh-ecmp followed by the

ECMP hash algorithm value.

(OPTIONAL) : Enter the keywordstack—unit followed by the

stack—unit slot number.

(OPTIONAL) Enter the keyword ip-sa-mask followed by the

ECMP/LAG hash mask value. The range is from 0 to FF.

(OPTIONAL) Enter the keyword ip-da-mask followed by the

ECMP/LAG hash mask value. The range is from 0 to FF.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Introduced on the E-Series ExaScale.

Added the nh-ecmp option.