Dell S4810 Reference Manual page 1182

rip
static
metric metric-
value
metric-type
type-value
route-map
map-name
tag tag-value
Defaults Not configured.
Command ROUTER OSPF
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
Usage To redistribute the default route (0.0.0.0/0), configure the default-information
Information originate command.
Despite removing an OSPF process globally, the OSPF process is not completely
removed from the BGP configuration.
1182
Enter the keyword rip to specify that RIP routing
information is redistributed.
Enter the keyword static to specify that information from
static routes is redistributed.
(OPTIONAL) Enter the keyword metric then a number. The
range is from 0 (zero) to 16777214.
(OPTIONAL) Enter the keywords metric-type then one of
the following:
• 1 = OSPF External type 1
• 2 = OSPF External type 2
(OPTIONAL) Enter the keywords route-map then the name
of the route map.
(OPTIONAL) Enter the keyword tag then a number. The
range is from 0 to 4294967295.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Open Shortest Path First (OSPFv2 and OSPFv3)