Show Ipv6 Mld_Host - Dell S4810 Reference Manual

show ipv6 mld_host

Display the IPv6 MLD host counters.
S4810
Syntax
show ipv6 mld_host
Command EXEC
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Usage The following describes the show ipv6 mld-host command shown in the
Information
following example.
Field
Valid MLD Packets
Reports
Leaves
MLDv1 queries
MLDv2 queries
Malformed
Packets
Example
MLD Host Traffic Counters
Elapsed time since counters cleared: 0028:33:52
938
ND advertised retransmit interval is 0 milliseconds
ND router advertisements are sent every 198 to 600 seconds
ND router advertisements live for 1800 seconds
ND advertised hop limit is 64
IPv6 hop limit for originated packets is 64
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Description
The total number of packets received and sent from the last
time the elapsed time was cleared.
The total number of reports (queries and unsolicited reports
generated from joins or leaves) that have been received or
sent.
The number of Multicast leaves that have been sent.
The number of MLDv1 queries that have been received.
The number of MLDv2 queries that have been received.
The number of MLDv1 and MLDv2 packets that do not
match the requirement for a valid MLD packet.
Received Sent
IPv6 Basics