Ip Ssh Password-Authentication - Dell S4810 Reference Manual

Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Usage The server-generated key is used for SSHv1 key-exchange.
Information

ip ssh password-authentication

Enable password authentication for the SSH server.
S4810
Syntax
ip ssh password-authentication enable
To disable password-authentication, use the no ip ssh password-
authentication enable command.
Parameters
enable
Defaults Enabled
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Usage With password authentication enabled, you can authenticate using the local,
Information RADIUS, or TACACS+ password fallback order as configured.
Security
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter the keyword enable to enable password-
authentication for the SSH server.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
1507