Dell S4810 Reference Manual page 750

Example
Dell(conf)#interface range gi 2/0 - 23, gi 2/1 - 10
(Multiple Ports)
Dell(conf-if-range-gi-2/0-23#
Example
Dell(conf)#interface range gi 2/1 - 11, gi 2/1 - 23
(Overlapping
Dell(conf-if-range-gi-2/1-23#
Ports)
Usage
Only VLAN and port-channel interfaces created using the interface vlan and
Information
interface port-channel commands can be used in the interface range
command.
Use the show running-config command to display the VLAN and port-channel
interfaces. VLAN or port-channel interfaces that are not displayed in the show
running-config command cannot be used with the bulk configuration feature of
the interface range command. You cannot create virtual interfaces (VLAN,
Port-channel) using the interface range command.
Example (Single
This example shows a single range bulk configuration.
Range)
Dell(config)# interface range gigabitethernet 5/1 - 23
Dell(config-if-range)# no shutdown
Dell(config-if-range)#
Example
This example shows how to use commas to add different interface types to the
(Multiple
range enabling all Gigabit Ethernet interfaces in the range 5/1 to 5/23 and both
Range)
Ten-Gigabit Ethernet interfaces 1/1 and 1/2.
Dell(config-if)# interface range gigabitethernet5/1-23,
tengigabitethernet1/1-2
Dell(config-if-range)# no shutdown
Dell(config-if-range)#
Example
This example shows how to use commas to add SONET, VLAN, and port-channel
(Multiple
interfaces to the range.
Range)
Dell(config-if)# interface range gigabitethernet5/1-23,
tengigabitethernet1/1–2,
Vlan 2–100, Port 1–25
Dell(config-if-range)# no shutdown
Dell(config-if-range)#
Related
interface port-channel
Commands
interface vlan
show config (from INTERFACE RANGE mode)
interfaces.
750
NOTE: If a range has VLAN, physical, port-channel, and SONET interfaces, only
commands related to physical interfaces can be bulk configured. To configure
commands specific to VLAN, port-channel, or SONET, only those respective
interfaces should be configured in a particular range.
— configures a port channel group.
— configures a VLAN interface.
— shows the bulk configuration
Interfaces