Dell S4810 Reference Manual page 1441

Parameters
system
exec
commands
{level | role
role-name
name | default
start-stop
wait-start
stop-only
tacacs+
Defaults none
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.5(0.0)
Version 9.2(1.0)
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Security
Enter the keyword system to send accounting information
of any other AAA configuration.
Enter the keyword exec to send accounting information
when a user has logged in to EXEC mode.
Enter the keyword command then a privilege level for
accounting of commands executed at that privilege level or
enter the keyword role then the role name for accounting
of commands executed by a user with that user role.
Enter one of the following:
• For name, enter a user-defined name of a list of
accounting methods.
• For default, the default accounting methods used.
Enter the keywords start-stop to send a "start accounting"
notice at the beginning of the requested event and a "stop
accounting" notice at the end of the event.
Enter the keywords wait-start to ensure that the TACACS
+ security server acknowledges the start notice before
granting the user's process request.
Enter the keywords stop-only to instruct the TACACS+
security server to send a "stop record accounting" notice at
the end of the requested user process.
Enter the keyword tacacs+ to use TACACS+ data for
accounting. The Dell Networking OS currently only supports
TACACS+ accounting.
Added support for roles on the Z9000, S6000, S4820T,
S4810, and MXL
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
1441