Isis Hello Padding - Dell S4810 Reference Manual

Defaults multiplier = 3; level-1 (if not otherwise specified)
Command INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.1
Usage
The holdtime (the product of the hello-multiplier multiplied by the hello-interval)
Information
determines how long a neighbor waits for a hello packet before declaring the
neighbor is down so routes can be recalculated.
Related isis hello-interval
Commands

isis hello padding

Turn ON or OFF padding of hello PDUs from INTERFACE mode.
S4810
Syntax
isis hello padding
To return to the default, use the no isis hello padding command.
Defaults Padding of hello PDUs is enabled (ON).
Command INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
984
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
— specifies the length of time between hello packets.
Introduced on the S6000.
Introduced on the S4820T.
Intermediate System to Intermediate System (IS-IS)