Secure Dhcp Commands - Dell S4810 Reference Manual

Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version
8.3.12.0
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Usage Dell Networking OS supports both inbound and outbound SSH sessions using IPv4
Information or IPv6 addressing. Inbound SSH supports accessing the system through the
management interface as well as through a physical Layer 3 interface.
Example
Dell#ssh 10.16.151.48 -l anvltest
Trying 10.16.151.48...
01:18:16: %STKUNIT0-M:CP %SEC-5-SSH_USAGE: Initiated SSH
Client v2 (FIPS Disabled) to anvltest@10.16.151.48 by default
from console
anvltest@10.16.151.48's password:
Last login: Thu Jan
[anvltest@dt-maa-linux-1 ~]# exit
logout
Dell#
Dell#ssh vrf vrf1 10.10.10.2 -l admin

Secure DHCP Commands

DHCP as defined by RFC 2131 provides no authentication or security mechanisms. Secure DHCP is a suite
of features that protects networks that use dynamic address allocation from spoofing and attacks.
clear ip dhcp snooping
Clear the DHCP binding table.
S4810
Syntax
clear ip dhcp snooping binding
Defaults none
Command EXEC Privilege
Modes
Security
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Added support for the -c and -m parameters on the S4810.
Introduced on the S4810.
Introduced on the S-Series.
Added IPv6 support. Introduced on the C-Series.
Introduced on the E-Series.
5 00:17:47 2012 from login-maa-101
1521