Policy-Map-Input - Dell S4810 Reference Manual

Hide thumbs Also See for S4810:

Table of Contents

CONFIGURATION (policy-map-input and policy-map-output)

This command is supported on S-Series, S6000 and S4810 under policy-map-

input mode only.

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Version 8.3.11.1

Version 8.3.7.0

Version 8.2.1.0

Version 7.6.1.0

Version 7.5.1.0

policy-map-input

policy-map-output

policy-map-input

Create an input policy map.

policy-map-input policy-map-name cpu-qos | [layer2]

To remove an input policy map, use the no policy-map-input policy-map-

name cpu-qos | [layer2] command.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Policy name character limit increased from 16 to 32.

Introduced on the S-Series.

Introduced on the C-Series.

Introduced on the E-Series.

— creates an input policy map.

— creates an output policy map (E-Series Only).

Enter the name of the policy map in character format (32

characters maximum).

Enter the cpu-qos keyword to assign this ACL to control

plane traffic only.

(OPTIONAL) Enter the keyword layer2 to specify a Layer 2

Class Map. The default is Layer 3.

Quality of Service (QoS)