Dell S4810 Reference Manual page 1610

Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Version 8.3.7.0
Version 8.3.11.1
Version 8.3.1.0
Version 7.8.1.0
Version 7.7.1.0
Usage
Resetting the management unit is not allowed, and an error message displays if you
Information
try to do so. Resetting is a soft reboot, including flushing the forwarding tables.
Starting with Dell Networking OS version 7.8.1.0, you can run this command
directly on the stack standby unit (standby master) to reset the standby. You cannot
reset any other unit from the standby unit.
Example
Stack MAC : 00:01:e8:8b:1a:36
Reload-Type : normal-reload [Next boot : normal-reload]
-- Stack Info --
Unit UnitType Status
----------------------------------------------------
0
1
2
3
4
5
6
7
8
9
10
11
Related
•
Commands
•
1610
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Added the hard reset option.
Augmented to run on the standby unit in order to reset the
standby unit directly.
Introduced on the S-Series.
Management online S4810
Standby online S4810
Member online S4810
Member online S4810
Member online S4810
Member online S4810
Member not present
Member not present
Member not present
Member not present
Member not present
Member not present
reload – reboots Dell Networking OS.
upgrade system stack-unit (S-Series stack member)
Series stack member.
ReqTyp CurTyp Version Ports
S4810 8-3-12-1 64
S4810 8-3-12-1 64
S4810 8-3-12-1 64
S4810 8-3-12-1 64
S4810 8-3-12-1 64
S4810 8-3-12-1 64
– resets the designated S-
Stacking