Show Monitor Session - Dell S4810 Reference Manual

Version 8.3.7.0
Version 8.3.11.1
Version 8.1.1.0
Version 7.7.1.0
Version 7.5.1.0
Version 7.4.1.0
Example
Dell(conf-mon-sess-1)#show config
!
monitor session 1
source TenGigabitEthernet 0/1 destination Port-channel 1
direction rx

show monitor session

Display information about monitoring sessions.
S4810
Syntax
show monitor session {session-ID}
To display monitoring information for all sessions, use the show monitor
session command.
Parameters
session-ID
Defaults none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.0.0
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.7.0
1300
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
(OPTIONAL) Enter a session identification number. The range
is from 0 to 65535.
EXEC
EXEC Privilege
Added support for the RPM / ERPM.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Port Monitoring