Qos-Policy-Input - Dell S4810 Reference Manual

Hide thumbs Also See for S4810:

Table of Contents

CONFIGURATION

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Version 8.3.11.1

Version 8.3.7.0

Version 8.2.1.0

Version 7.6.1.0

To assign traffic to different flows using QoS policy, use the Output Policy map.

This command enables Policy-Map-Output Configuration mode (conf-policy-

service-queue

policy-aggregate

using policy maps.

service-policy output

qos-policy-input

Create a QoS input policy on the router.

qos-policy-input qos-policy-name cpu-qos | layer2

To remove an existing input QoS policy from the router, use the no qos-policy-

input qos-policy-name cpu-qos | layer2 command.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Policy name character limit increased from 16 to 32.

Introduced on the C-Series and S-Series.

Introduced on the E-Series.

— assigns a class map and QoS policy to different queues.

— allows an aggregate method of configuring per-port QoS

— applies an output policy map to the selected interface.

Enter the name for the policy map in character format (32

characters maximum).

(OPTIONAL) Enter the keyword cpu-qos keyword to assign

this ACL to control plane traffic only.

(OPTIONAL) Enter the keyword layer2 to specify a Layer 2

Class Map. The default is Layer 3.

Quality of Service (QoS)