Router-Id - Dell S4810 Reference Manual

Defaults Not configured.
Command
ROUTER OSPF for OSPFv2
Modes
ROUTER OSPFv3 for OSPFv3
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.1.
(0.0)
Version
8.3.19.0
Version 7.8.1.0
Version 7.4.1.0
Usage
To redistribute the default route (x:x:x:x::x), use the default-information
Information
originate command.
Related
default-information originate
Commands

router-id

Designate a fixed router ID.
S4810
Syntax
router-id ip-address
To return to the previous router ID, use the no router-id ip-address
command.
Parameters
ip-address
Defaults The router ID is selected automatically from the set of IPv4 addresses configured
on a router.
Command
ROUTER OSPF for OSPFv2
Modes
ROUTER OSPFv3 for OSPFv3
Open Shortest Path First (OSPFv2 and OSPFv3)
The default is 0.
Introduced support for OSPFv3 on the S4810 and Z9000.
Introduced on the S4820T.
Added support for the C-Series.
Introduced on the E-Series.
– configures default external route into OSPFv3.
Enter the router ID in the dotted decimal format.
1249