Show Config - Dell S4810 Reference Manual

Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4(0.0)
Version 9.0.2.0
Version 9.0.2.0
Version 8.3.11.1
Version 8.3.7.0
Usage The monitor command is saved in the running configuration at Monitor Session
Information
mode level and can be restored after a chassis reload.
Example
Dell(conf)# monitor session 60
Dell(conf-mon-sess-60)
Related
show monitor session
Command
show running-config monitor session
monitor session.

show config

Display the current monitor session configuration.
S4810
Syntax
show config
Defaults none
Command MONITOR SESSION (conf-mon-sess-session-ID)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Port Monitoring
Added support for the rpm/erpm option on the S4810.
Introduced on the S6000.
Introduced on the MXL.
Introduced on the Z9000.
Introduced on the S4810.
— displays the monitor session.
— displays the running configuration of a
Introduced on the S6000.
Introduced on the S4820T.
1299