Show Mac Accounting Destination - Dell S4810 Reference Manual

Example
Dell#show mac-address-table aging-time
Dell#
Related show mac-address-table
Commands

show mac accounting destination

Display destination counters for Layer 2 traffic (available on physical interfaces only).
S4810
Syntax
show mac accounting destination [mac-address vlan vlan-id]
[interface interface [mac-address vlan vlan-id] [vlan vlan-id]]
[vlan vlan-id]
Parameters
mac-address
interface
interface
vlan vlan-id
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Version 8.5.1.0
Version 8.3.7.0
pre-Version
6.2.1.1
Layer 2
Mac-address-table aging time : 1800
(OPTIONAL) Enter the MAC address in the
nn:nn:nn:nn:nn:nn format to display information on that
MAC address.
(OPTIONAL) Enter the keyword interface then the
interface type, slot and port information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
(OPTIONAL) Enter the keyword vlan then the VLAN ID to
display the MAC address assigned to the VLAN. The range is
from 1 to 4094.
EXEC
EXEC Privilege
Introduced on the S4820T.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S4810.
Introduced on the E-Series.
— displays the current MAC address configuration.
1045