Show Ip Cam Linecard - Dell S4810 Reference Manual

Field
TTL
Type
Address
Example
Dell#show hosts
Default domain is not set
Name/address lookup uses static mappings
Name servers are not set
Host
-------- -----
ks
4200-1
1230-3
ZZr
Z10-3
Dell#
Related
traceroute
Commands
ip host

show ip cam linecard

View CAM entries for a port pipe on a line card.
S4810
Syntax
show ip cam linecard number port-set pipe-number [ip-address
mask [longer-prefixes] | index index-number | summary | vrf vrf
instance]
Parameters
number
pipe-number
ip-address
mask [longer-
prefix]
index index-
number
summary
878
Description
• ?? — the entry is suspect.
Displays the amount of time until the entry ages out of the
cache. For dynamically learned entries only.
Displays IP as the type of entry.
Displays the IP addresses assigned to the host.
Flags TTL
----
(perm, OK) -
(perm, OK) -
(perm, OK) -
(perm, OK) -
(perm, OK) -
— views the DNS resolution.
— configures a host.
Enter the number of the line card.
Enter the number of the line card's port-pipe. The range is
from 0 to 1.
(OPTIONAL) Enter the IP address and mask of a route to
CAM entries for that route only. Enter the keyword longer-
prefixes to view routes with a common prefix.
(OPTIONAL) Enter the keyword index then the CAM index
number. The range depends on CAM size.
(OPTIONAL) Enter the keyword summary to view a table
listing route prefixes and the total number of routes that can
be entered into the CAM.
Type Address
---- -------
IP 2.2.2.2
IP 192.68.69.2
IP 192.68.99.2
IP 192.71.18.2
IP 192.71.23.1
IPv4 Routing