Fips Cryptography; Fips Mode Enable - Dell S4810 Reference Manual

FIPS Cryptography

To configure federal information processing standards (FIPS) cryptography, use the following commands
on the S4810 platform.

fips mode enable

Enable the FIPS cryptography mode on the platform.
S4810
Syntax
[no] fips mode enable
To disable the FIPS cryptography mode, use the no fips mode enable
command.
Default Disabled
Command CONFIGURATION
Modes
Example
Dell (conf)#fips mode enable
WARNING: Enabling FIPS mode will close all SSH/Telnet
connection, restart those servers, and destroy all configured
host keys.
proceed (y/n) ? y
Dell (conf)#
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.1(0.0)
Version
8.3.19.0
Version
8.3.12.0
FIPS Cryptography
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
17
647