Ip Mroute - Dell S4810 Reference Manual

Version 8.3.7.0
Version 7.8.1.0
E-Series legacy
command
Related show ip pim tib
Commands

ip mroute

Assign a static mroute.
S4810
Syntax
ip mroute destination mask {ip-address | null 0| {{bgp| ospf}
process-id | isis | rip | static} {ip-address | tag | null 0}}
[distance]
To delete a specific static mroute, use the ip mroute destination mask {ip-
address | null 0| {{bgp| ospf} process-id | isis | rip |
static} {ip-address | tag | null 0}} [distance] command.
To delete all mroutes matching a certain mroute, use the no ip mroute
destination mask command.
Parameters
destination
mask
null 0
[protocol
[process-id |
tag] ip-address]
static ip-
address
ip-address
1134
Introduced on the S4810.
Introduced on the C-Series.
— shows the PIM tree information base.
Enter the IP address in dotted decimal format of the
destination device.
Enter the mask in slash prefix formation ( /x ) or in dotted
decimal format.
(OPTIONAL) Enter the keyword null then zero (0).
(OPTIONAL) Enter one of the routing protocols:
• Enter the BGP as-number then the IP address in dotted
decimal format of the reverse path forwarding (RPF)
neighbor. The range is from 1 to 65535.
• Enter the OSPF process identification number then the IP
address in dotted decimal format of the RPF neighbor.
the range is from 1 to 65535.
• Enter the IS-IS alphanumeric tag string then the IP
address in dotted decimal format of the RPF neighbor.
• Enter the RIP IP address in dotted decimal format of the
RPF neighbor.
(OPTIONAL) Enter the Static IP address in dotted decimal
format of the RPF neighbor.
(OPTIONAL) Enter the IP address in dotted decimal format of
the RPF neighbor.
Multicast