Show Arp Retries; Show Hosts - Dell S4810 Reference Manual

----------------------------------------------
83
Dell
Related
ip local-proxy-arp
Commands
switchport mode private-vlan

show arp retries

Display the configured number of ARP retries.
S4810
Syntax
show arp retries
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.1.0
Related
arp retries
Commands
ARP reply in response to an ARP request.

show hosts

View the host table and DNS configuration.
S4810
Syntax
show hosts
876
0
— enables/disables Layer 3 communication in secondary VLANs.
EXEC
EXEC Privilege
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced.
— sets the number of ARP retries in case the system does not receive an
83
— sets PVLAN mode of the selected port.
CP
IPv4 Routing