Monitor Interface - Dell S4810 Reference Manual

Hide thumbs Also See for S4810:

Table of Contents

monitor interface

Monitor counters on a single interface or all interfaces on a line card. The screen is refreshed every five

seconds and the CLI prompt disappears.

monitor interface [interface]

To disable monitoring and return to the CLI prompt, press the q key.

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Version 8.3.11.1

Version 8.5.1.0

Version 8.3.7.0

Version 8.1.1.0

Version 7.6.1.0

Version 7.5.1.0

(OPTIONAL) Enter the following keywords and slot/port or

number information:

For the management port, enter the keyword

managementethernet then the slot (0 or 1) and the port

For a Tunnel interface, enter the keyword tunnel then

the slot/port. The range is from 1 to 16383.

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

For a VLAN interface, enter the keyword vlan then the

slot/port. The range is from 1 to 4094.

EXEC Privilege

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Added support for 4-port 40G line cards on ExaScale.

Introduced on the S4810.

Introduced on the E-Series ExaScale.

Introduced on the S-Series.

Introduced on the C-Series.