Show Link-Bundle Distribution - Dell S4810 Reference Manual

show link-bundle distribution

Display the link-bundle distribution for the interfaces in the bundle, type of bundle (LAG or ECMP), and
the most recently calculated interface utilization (either bytes per second rate or maximum rate) for each
interface.
S4810
Syntax
show link-bundle-distribution
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Example
Dell#show link-bundle-distribution
Link-bundle trigger threshold - 30
ECMP bundle - 64
State - Inactive
Interface
Percent]
Te 0/0
Po 128
Po 100
Dell#
646
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Utilization[In Percent] - 0
Line Protocol
Up
Up
Up
Alarm
Utilization[In
0
0
0
Equal Cost Multi-Path (ECMP)