Mac Learning-Limit Mac-Address-Sticky; Mac Learning-Limit Station-Move-Violation - Dell S4810 Reference Manual

mac learning-limit mac-address-sticky

Maintain the dynamically learned mac addresses as sticky MAC addresses on the selected port.
S4810
Syntax
mac learning-limit mac-address-sticky
To convert the sticky MAC addresses to dynamic MAC addresses, use the no mac
learning-limit command.
Parameters
mac-address-
sticky
Defaults none
Command INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version
8.3.12.0
Usage If you configure mac-learn-limit and the sticky MAC feature is enabled,
Information
dynamically learned MAC addresses are converted to sticky for that port. Any new
MAC address that is learned also becomes sticky for that port.
Related show mac learning-limit
Commands

mac learning-limit station-move-violation

Specify the actions for a station move violation.
S4810
Syntax
mac learning-limit station-move-violation {log | shutdown-both
| shutdown-offending | shutdown-original}
To disable a configuration, use the no mac learning-limit station-move-
violation command, then the configured keyword.
1036
Configures the dynamic MAC addresses as sticky on an
interface.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
— displays the details of the mac learning-limit.
Layer 2