Dell S4810 Reference Manual page 1196

Version 9.4.
(0.0)
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
Usage The following describes the show ip ospf process-id database external
Information command shown in the following example.
Field
LS Age
Options
LS Type
Link State ID
Advertising Router
LS Seq Number
Checksum
Length
Network Mask
Metrics Type
TOS
1196
Added support for VRF.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Description
Displays the LSA's age.
Displays the optional capabilities available on router. The
following options can be found in this item:
• TOS-capability or No TOS-capability is displayed
depending on whether the router can support Type of
Service.
• DC or No DC is displayed depending on whether the
originating router can support OSPF over demand
circuits.
• E or No E is displayed on whether the originating router
can accept AS External LSAs.
Displays the LSA's type.
Displays the Link State ID.
Identifies the router ID of the LSA's originating router.
Identifies the link state sequence number. This number
enables you to identify old or duplicate LSAs.
Displays the Fletcher checksum of the LSA's complete
contents.
Displays the length in bytes of the LSA.
Displays the network mask implemented on the area.
Displays the external type.
Displays the Type of Service (TOS) options. Option 0 is the
only option.
Open Shortest Path First (OSPFv2 and OSPFv3)