Revision - Dell S4810 Reference Manual

revision

The revision number for the multiple spanning tree configuration.
S4810
Syntax
revision range
To return to the default values, use the no revision command.
Parameters
range
Defaults 0
Command MULTIPLE SPANNING TREE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.2.1.1
Usage For two MSTP switches to be within the same MST region, the switches must share
Information the same revision number.
Related
msti
Commands
name
1124
Enter the revision number for the MST configuration. The
range is from 0 to 65535. The default is 0.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— maps the VLAN(s) to an MST instance.
— assigns the region name to the MST region.
Multiple Spanning Tree Protocol (MSTP)