Max-Age - Dell S4810 Reference Manual

Related
forward-delay
Commands
state.

max-age

configuration information.
max-age
To maintain configuration information before refreshing that information, set the time interval for the
RSTP bridge.
S4810
Syntax
max-age seconds
To return to the default values, use the no max-age command.
Parameters
max-age
Defaults 20 seconds
Command CONFIGURATION RSTP (conf-rstp)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
Version 6.2.1.1
Related
forward-delay
Commands
state.
1430
— changes the wait time before RSTP transitions to the Forwarding
— changes the wait time before RSTP refreshes the protocol
Enter a number of seconds the Dell Networking OS waits
before refreshing configuration information. The range is
from 6 to 40 seconds. The default is 20 seconds.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— changes the wait time before RSTP transitions to the Forwarding
Rapid Spanning Tree Protocol (RSTP)