show mac learning-limit
mac learning-limit learn-limit-violation
Configure an action for a MAC address learning-limit violation.
S4810
Syntax
mac learning-limit learn-limit-violation {log | shutdown}
To return to the default, use the no mac learning-limit learn-limit-
violation {log | shutdown} command.
Parameters
log
shutdown
Defaults
none
Command
INTERFACE (conf-if-interface-slot/port)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
Version 7.8.1.0
Version 7.5.1.0
Usage
This command is supported on physical interfaces, static LAGs, and LACP LAGs.
Information
Related
show mac learning-limit
Commands
Layer 2
— displays MAC learning-limit configuration.
Enter the keyword log to generate a syslog message on a
learning-limit violation.
Enter the keyword shutdown to shut down the port on a
learning-limit violation.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— displays details of the mac learning-limit.
1035