Distribute-List In - Dell S4810 Reference Manual

Hide thumbs Also See for S4810:

Table of Contents

weight = 120

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Version 8.3.11.1

Version 8.3.7.0

Version 7.8.1.0

Version 7.6.1.0

default-metric

redistribute command.

distribute-list in

Configure a filter for incoming routing updates.

distribute-list prefix-list-name in [interface]

To delete the filter, use the no distribute-list prefix-list-name in

prefix-list-

Introduced on the S6000.

Introduced on the S4820T

Introduced on the Z9000.

Introduced on the S4810.

Introduced on the S-Series.

Introduced on the C-Series.

Introduced on the E-Series.

— assigns one distance metric to all routes learned using the

Enter the name of a configured prefix list.

(OPTIONAL) Identifies the interface type slot/port as one of

the following:

For a Port Channel interface, enter the keywords port-

channel then a number. The range is from 1 to 128.

For a 1-Gigabit Ethernet interface, enter the keyword

GigabitEthernet followed by the slot/ port

information.

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

Routing Information Protocol (RIP)