Dell S4810 Reference Manual page 1199

Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
Usage The following describes the show ip ospf process-id database network
Information command shown in the following example.
Field
LS Age
Options
LS Type
Link State ID
Advertising Router
Checksum
Length
Network Mask
Attached Router
Example
Dell#show ip ospf 1 data network
LS age: 1372
Options: (No TOS-capability, DC, E)
LS type: Network
Link State ID: 202.10.10.2
Advertising Router: 20.20.20.8
LS Seq Number: 0x80000006
Checksum: 0xa35
Length: 36
Network Mask: /24
Open Shortest Path First (OSPFv2 and OSPFv3)
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Description
Displays the LSA's age.
Displays the optional capabilities available on router. The
following options can be found in this item:
• TOS-capability or No TOS-capability is displayed
depending on whether the router can support Type of
Service.
• DC or No DC is displayed depending on whether the
originating router can support OSPF over demand
circuits.
• E or No E is displayed on whether the originating router
can accept AS External LSAs.
Displays the LSA's type.
Displays the Link State ID.
Identifies the router ID of the LSA's originating router.
Identifies the link state sequence number. This number
enables you to identify old or duplicate LSAs.
Displays the Fletcher checksum of an LSA's complete
contents.
Displays the length in bytes of the LSA.
Identifies the IP address of routers attached to the network.
OSPF Router with ID (20.20.20.5) (Process ID 1)
Network (Area 0.0.0.0)
Attached Router: 20.20.20.8
Attached Router: 20.20.20.9
Attached Router: 20.20.20.7
1199