Threshold - Dell S4810 Reference Manual

Field
Status (Allowed
ports)
Example
Dell# test cam-usage service-policy input pmap_l2 stack-unit
all
For a L2 Input Policy Map pmap_l2, the output must be as
follows,
stack-unit|Portpipe|CAM Partition|Available CAM|Estimated CAM|
Status
(Allowed ports)
0
Allowed (2)
0
Exception
1
Allowed (5)
1
Exception
13
Allowed (2)
Dell#

threshold

Specify the minimum and maximum threshold values for the configured WRED profiles.
S4810
Syntax threshold min number max number max-drop-probability
To remove the threshold values, use the no threshold min number max
number command.
Parameters
min number
max-drop-
probability
number
1368
Description
Indicates if the input policy map configuration on an
interface belonging to a stack-unit/port-pipe is successful
— Allowed (n) — or not successful — Exception. The
allowed number (n) indicates the number of ports in that
port-pipe on which the Policy Map can be applied
successfully.
NOTE: In a Layer 2 Policy Map, IPv4/IPv6 rules are not allowed; therefore, the
output contains only L2ACL CAM partition entries.
| |
0
1
0
1
1
Enter the keyword min then the minimum threshold number
for the WRED profile. The range is from 1 to 9360.
Enter the keyword max-drop-probability followed by the
maximum number of packets for the WRED profile. The
range is from 0 to 100 KB
|
L2ACL 500
L2ACL 100
L2ACL 1000
L2ACL 0
...
...
...
L2ACL 400
|per Port |
200
200
200
200
200
Quality of Service (QoS)