Show Interfaces Phy - Dell S4810 Reference Manual

detail
Defaults none
Command EXEC
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.5.1.0
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
Version 7.4.1.0
Example
Dell#show interfaces dampening
Interface Supp
Gi 3/2
Gi 3/10
Dell#
Related
dampening
Commands
show interfaces
interface.
show interfaces configured
configuration.

show interfaces phy

Display auto-negotiation and link partner information.
S4810
Syntax
show interfaces gigabitethernet slot/port phy
776
(OPTIONAL) Enter the keyword detail to display detailed
interface dampening data.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced
Flaps Penalty Half-Life Reuse Suppress Max-Sup
State
Up 0 0
Up 0 0
— configures dampening on an interface.
— displays information on a specific physical interface or virtual
— displays any interface with a non-default
20 800 4500
5 750 2500
120
20
Interfaces