Advertise Med Power-Via-Mdi - Dell S4810 Reference Manual

civic-based
value
ecs-elin value
Defaults unconfigured.
Command CONFIGURATION (conf-lldp)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.7.1.0
Version 7.6.1.0
Usage
•
Information
•
Related
debug lldp interface
Commands
show lldp neighbors

advertise med power-via-mdi

To advertise the Extended Power via MDI TLV, configure the system.
S4810
Syntax
advertise med power-via-mdi
To return to the default, use the no advertise med power-via-mdi command.
Defaults unconfigured.
1086
Enter the keywords civic-based then the civic based
location in hexadecimal format. The range is from 6 to 255
bytes.
Enter the keywords ecs-elin then the Emergency Call
Service (ecs) Emergency Location Identification Number
(elin) numeric location string. The range is from 10 to 25
characters.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series and E-Series.
ECS — Emergency call service such as defined by TIA or the national
emergency numbering association (NENA)
ELIN — Emergency location identification number, a valid North America
Numbering Plan format telephone number supplied for ECS purposes.
— debugs LLDP.
— displays the LLDP neighbors.
Link Layer Discovery Protocol (LLDP)