Ip Domain-Name; Ip Domain-List - Dell S4810 Reference Manual

ip domain-name

Configures the default domain corresponding to a specific VRF. This domain is appended to the in
complete DNS requests corresponding to the specified VRF.
S4810
Syntax
ip domain-name [vrf vrf-name] name
To undo the domain name configuration corresponding to a specific VRF, use the
no ip domain-name [vrf vrf-name] name command.
Parameters
vrf vrf-name
name
Defaults None
Command EXEC
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0)
Usage Use this command to configure a domain name corresponding to a VRF. This
Information domain is appended to the in complete DNS requests corresponding to the
specified VRF.
Example
Dell(conf)#ip domain-name vrf jay dell.com

ip domain-list

Adds a domain name to the DNS list. This domain name is appended to incomplete host names in DNS
requests corresponding to a specific VRF.
S4810
Syntax
ip domain-list [vrf vrf-name] name
To remove a domain name from DNS list, use the no ip domain-list [vrf
vrf-name] name command.
Parameters
vrf vrf-name
Dynamic Host Configuration Protocol (DHCP)
(Optional) Enter the key word vrf and then the name of the
VRF to configure the domain corresponding to that VRF.
Enter the name of the domain to be appended to the in
complete DNS requests corresponding to the specified VRF.
Introduced on the S-Series and Z-Series.
(Optional) Enter the key word vrf and then the name of the
VRF to add a domain name to the DNS list corresponding to
that VRF.
633