Private-Vlan Mapping Secondary-Vlan - Dell S4810 Reference Manual

Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Usage The VLAN:
Information
•
•
•
Only ports (and port channels) configured as promiscuous, host, or PVLAN trunk
ports (as previously described) can be added to the PVLAN. No other regular ports
can be added to the PVLAN.
After using this command to configure a VLAN as a primary VLAN, use the
private-vlan mapping secondary-vlan command to map secondary VLANs
to this VLAN.
Related

private-vlan mapping secondary-vlan

Commands
primary VLAN.
switchport mode private-vlan
private-vlan mapping secondary-vlan
Map secondary VLANs to the selected primary VLAN.
S4810
Syntax
[no] private-vlan mapping secondary-vlan vlan-list
To remove specific secondary VLANs from the configuration, use the no
private-vlan mapping secondary-vlan vlan-list command syntax.
Parameters
vlan-list
Defaults none
1308
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
can be in only one mode, either community, isolated, or primary.
mode ode to community or isolated even before associating it to a primary
VLAN. This secondary VLAN continues to work normally as a normal VLAN even
though it is not associated to a primary VLAN. (A syslog message indicates this.)
must not have a port in it when VLAN mode is being set.
Enter the list of secondary VLANs to associate with the
selected primary VLAN. The list can be in comma-delimited
or hyphenated-range format, following the convention for
the range input.
— maps secondary VLANs to the selected
— sets PVLAN mode of the selected port.
Private VLAN (PVLAN)