Show Isis Hostname - Dell S4810 Reference Manual

Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.1
Version 8.3.1.0
Example
FTOS#show isis graceful-restart detail
Configured Timer Value
======================
Graceful Restart
T3 Timer
T3 Timeout Value
T2 Timeout Value
T1 Timeout Value
Adjacency wait time : 30
Operational Timer Value
======================
Current Mode/State
T3 Time left
T2 Time left
Restart ACK rcv count
Restart Req rcv count
Suppress Adj rcv count : 0 (level-1), 0 (level-2)
Restart CSNP rcv count : 0 (level-1), 0 (level-2)
Database Sync count
FTOS#

show isis hostname

Display IS-IS host names configured or learned on the E-Series.
S4810
Syntax
show isis hostname
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
1012
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series.
: Enabled
: Manual
: 30
: 30 (level-1), 30 (level-2)
: 5, retry count: 1
EXEC
EXEC Privilege
: Normal/RUNNING
: 0
: 0 (level-1), 0 (level-2)
: 0 (level-1), 0 (level-2)
: 0 (level-1), 0 (level-2)
: 0 (level-1), 0 (level-2)
Intermediate System to Intermediate System (IS-IS)