Dell S4810 Reference Manual page 1162

Hide thumbs Also See for S4810:

Table of Contents

To remove a filter, use the no distribute-list prefix-list-name out

[bgp | connected | isis | rip | static] command.

prefix-list-

Not configured.

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Version 8.3.11.1

Version 8.3.7.0

Version 7.8.1.0

Version 7.6.1.0

Enter the name of a configured prefix list.

(OPTIONAL) Enter the keyword bgp to specify that BGP

routes are distributed.

NOTE: BGP and ISIS routes are not available on the C-

Series. BGP, ISIS, and RIP routes are not available on the

(OPTIONAL) Enter the keyword connected to specify that

connected routes are distributed.

(OPTIONAL) Enter the keyword isis to specify that IS-IS

routes are distributed.

NOTE: BGP and ISIS routes are not available on the C-

Series. BGP, ISIS, and RIP routes are not available on the

(OPTIONAL) Enter the keyword rip to specify that RIP

routes are distributed.

NOTE: BGP and ISIS routes are not available on the C-

Series. BGP, ISIS, and RIP routes are not available on the

(OPTIONAL) Enter the keyword static to specify that only

manually configured routes are distributed.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Added support for the Multi-Process OSPF.

Introduced on the S-Series.

Open Shortest Path First (OSPFv2 and OSPFv3)