Show Ip Ospf Topology - Dell S4810 Reference Manual

Version
8.3.19.0
Version 8.3.11.1
Version 8.3.8.0
Example
Dell#show ip ospf 10 timers rate-limit
List of LSAs in rate limit Queue
LSA id: 1.1.1.0 Type: 3 Adv Rtid: 3.3.3.3 Expiry time:
00:00:09.111
LSA id: 3.3.3.3 Type: 1 Adv Rtid: 3.3.3.3 Expiry time:
00:00:23.96
Dell#

show ip ospf topology

Display routers in directly connected areas.
S4810
Syntax
show ip ospf [process-id | vrf vrf-name] topology
Parameters
process-id
vrf vrf-name
Defaults none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0)
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Open Shortest Path First (OSPFv2 and OSPFv3)
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Enter the OSPF Process ID to show a specific process. If no
Process ID is entered, command applies only to the first
OSPF process.
Enter the keyword vrf followed by the name of the VRF to
information on routers corresponding to a specific VRF that
are in directly connected areas.
EXEC
EXEC Privilege
Added support for VRF.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
1221