Disable - Dell S4810 Reference Manual

Hide thumbs Also See for S4810:

Table of Contents

protocol spanning-tree pvst

disable

Disable PVST+ globally.

To enable PVST+, use the no disable command.

CONFIGURATION (conf-pvst)

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Version 8.3.11.1

Version 8.3.7.0

Version 7.6.1.0

Version 7.5.1.0

protocol spanning-tree pvst

— enter SPANNING TREE mode on the switch.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Introduced on the S-Series.

Introduced on the C-Series.

Introduced on the E-Series.

— enter PVST+ mode.

Per-VLAN Spanning Tree Plus (PVST+)