Distance Ospf - Dell S4810 Reference Manual

Parameters
weight
ip-address
mask
access-list-
name
Defaults 110
Command ROUTER OSPF
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1

distance ospf

Configure an OSPF distance metric for different types of routes.
S4810
Syntax
distance ospf [external dist3] [inter-area dist2] [intra-area
dist1]
To delete these settings, use the no distance ospf command.
Parameters
external dist3
Open Shortest Path First (OSPFv2 and OSPFv3)
Specify an administrative distance. The range is from 1 to
255. The default is 110.
(OPTIONAL) Enter a router ID in the dotted decimal format. If
you enter a router ID, include the mask for that router
address.
(OPTIONAL) Enter a mask in dotted decimal format or /n
format.
(OPTIONAL) Enter the name of an IP standard access list, up
to 140 characters.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for the Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
(OPTIONAL) Enter the keyword external then a number to
specify a distance for external type 5 and 7 routes. The range
is from 1 to 255. The default is 110.
1159