Debug Ipv6 Ospf Packet - Dell S4810 Reference Manual

Hide thumbs Also See for S4810:

Table of Contents

debug ipv6 ospf packet

Display debug information and interface types on OSPF IPv6 packets.

debug ipv6 ospf {packet | events} [interface]

EXEC Privilege

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.1.

Version 7.8.1.0

Version 7.4.1.0

Dell#debug ipv6 ospf packet

OSPFv3 packet related debugging is on for all interfaces

05:21:01 : OSPFv3: Sending, Ver:3, Type:1(Hello), Len:40,

ID:223.255.255.254, Area ID:0, Inst:0, on Po 255

05:21:03 : OSPFv3: Received, Ver:3, Type:1(Hello), Len:40,

ID:223.255.255.255, Area ID:0, Chksum:a177, Inst:0, from Vl 100

05:20:25 : OSPFv3: Sending, Ver:3, Type:4(LS Update), Len:580,

ID:223.255.255.254, Area ID:0, Inst:0, on Vl 1000

07:21:40 : OSPFv3: Received, Ver:3, Type:1(Hello), Len:40,

(OPTIONAL) Enter one of the following keywords and slot/

port or number information:

For a 1-Gigabit Ethernet interface, enter the keyword

GigabitEthernet then the slot/port information.

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

For a Port Channel interface, enter the keyword port-

channel then a number. The range is 1 to 128.

For a tunnel interface, enter the keyword tunnel then a

number. The range is 1 to 16383.

For a VLAN, enter the keyword vlan then a number from

Introduced on the S4810 and Z9000.

Introduced on the S4820T.

Added support for C-Series.

Introduced on E-Series.

Open Shortest Path First (OSPFv2 and OSPFv3)