Show Ip Pim Snooping Tib - Dell S4810 Reference Manual

Version
8.3.12.0
Version 8.4.1.1
Usage The following describes the show ip pim snooping neighbor commands
Information shown in the following example.
Field
Neighbor address
Interface
Uptime/expires
Ver
DR prio/Mode
Example
Dell#show ip pim snooping neighbor
Neighbor
Address
165.87.32.2
165.87.32.10
165.87.32.12

show ip pim snooping tib

Display information from the tree information base (TIB) PIM-SM snooping discovered about multicast
group members and states.
S4810
Syntax
show ip pim snooping tib [vlan vlan-id] [group-address [source-
address]]
Parameters
vlan vlan-id
1290
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Description
Displays the IP address of the neighbor learned through
PIM-SM snooping.
Displays the VLAN ID number and slot/port on which the
PIM-SM-enabled neighbor was discovered.
Displays the amount of time the neighbor has been up then
the amount of time until the neighbor is removed from the
multicast routing table (that is, until the neighbor hold time
expires).
Displays the PIM version number:
• v2 = PIM version 2
Displays the Designated Router priority and the mode:
• 1 = default Designated Router priority (use the ip pim
dr-priority command)
• DR = Designated Router
• S = Sparse mode
Interface
Vl 2 [Gi 4/13 ]
Vl 2 [Gi 4/11 ]
Vl 2 [Gi 4/20 ]
(OPTIONAL) Enter a VLAN ID to display TIB information PIM-
SM snooping discovered on a specified VLAN. The valid
VLAN IDs range is from 1 to 4094.
Uptime/Expires
00:04:03/00:01:42
00:00:46/00:01:29
00:00:51/00:01:24
PIM-Sparse Mode (PIM-SM)
Ver DR Prio
v2 1
v2 0
v2 0