Protocol Frrp; Show Frrp - Dell S4810 Reference Manual

protocol frrp

Enter the Resilient Ring Protocol and designate a ring identification.
S4810
Syntax
protocol frrp {ring-id}
To exit the ring protocol, use the no protocol frrp {ring-id} command.
Parameters
ring-id
Defaults none
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
Version 7.4.1.0
Usage This command places you into the resilient ring protocol. After executing this
Information command, the command line prompt changes to conf-frrp.

show frrp

Display the resilient ring protocol configuration.
S4810
Syntax
show frrp [ring-id [summary]] | [summary]
Parameters
ring-id
Force10 Resilient Ring Protocol (FRRP)
Enter the ring identification number. The range is from 1 to
255.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series.
Introduced
Enter the ring identification number. The range is from 1 to
255
677