Username - Dell S4810 Reference Manual

username

Establish an authentication system based on user names.
S4810
Syntax
username name [access-class access-list-name] [nopassword |
{password | secret} [encryption-type] password] [privilege
level] [role role-name]
If you do not want a specific user to enter a password, use the nopassword
option.
To delete authentication for a user, use the no username name command.
Parameters
name
access-class
access-list-
name
nopassword
password
secret
encryption-
type
password
privilege level
role role-name
secret
1468
Enter a text string for the name of the user up to 63
characters.
Enter the keywords access-class then the name of a
configured access control list (either an IP access control list
or MAC access control list).
Enter the keyword nopassword to specify that the user
should not enter a password.
Enter the keyword password then the encryption-type
or the password.
Enter the keyword secret then the encryption-type or
the password.
Enter an encryption type for the password that you enter.
• 0 directs the system to store the password as clear text. It
is the default encryption type when using the password
option.
• 7 to indicate that a password encrypted using a DES
hashing algorithm follows. This encryption type is
available with the password option only.
• 5 to indicate that a password encrypted using an MD5
hashing algorithm follows. This encryption type is
available with the secret option only, and is the default
encryption type for this option.
Enter a string up to 32 characters long.
Enter the keyword privilege then a number from zero (0)
to 15.
Enter the keyword role followed by the role name to
associate with that user ID.
Enter the keyword secret then the encryption type.
Security