Ip Ssh Pub-Key-File - Dell S4810 Reference Manual

ip ssh pub-key-file

Specify the file used for host-based authentication.
S4810
Syntax
ip ssh pub-key-file {WORD}
Parameters
WORD
Defaults none
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Usage
This command specifies the file used for the host-based authentication. The
Information
creates/ file overwrites the flash://ADMIN_DIR/ssh/knownhosts file and
deletes the user-specified file. Even though this command is a global configuration
command, it does not appear in the running configuration because you only need
to run this command once.
The file contains the OpenSSH-compatible public keys of the host for which host-
based authentication is allowed. An example known host file format:
poclab4,123.12.1.123 ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEAox/
QQp8xYhzOxn07yh4VGPAoUfgKoieTHO9G4sNV+ui
+DWEc3cgYAcU5Lai1MU2ODrzhCwyDNp05tKBU3t
ReG1o8AxLi6+S4hyEMqHzkzBFNVqHzpQc
+Rs4p2urzV0F4pRKnaXdHf3Lk4D460HZRhhVrxqeNxPDpEn WIMPJi0ds=
ashwani@poclab4
1508
Enter the file name for the host-based authentication.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
NOTE: For rhostfile and pub-key-file, the administrator must FTP the
file to the chassis.
Security