Show Iscsi Session Detailed - Dell S4810 Reference Manual

Version
8.3.19.0
Version
8.3.12.0
Version
8.3.16.0
Example
Dell# show isci session
Session 0:
------------------------------------------------------
Target: iqn.2001-05.com.equallogic:
0-8a0906-0e70c2002-10a0018426a48c94-iom010
Initiator: iqn.1991-05.com.microsoft:win-x9l8v27yajg
ISID: 400001370000
Session 1:
---------------------------------------------------------
Target: iqn.2001-05.com.equallogic:
0-8a0906-0f60c2002-0360018428d48c94-iom011
Initiator: iqn.1991-05.com.microsoft:win-x9l8v27yajg
ISID: 400001370000.
Usage
Only sessions the switch observes are learned; sessions flowing through an
Information
adjacent switch are not learned.
After the switch is reloaded, any information exchanged during the initial
handshake is not available. If the switch picks up the communication after
reloading, it would detect a session was in progress but could not obtain complete
information for it. Any incomplete information of this type would not be available in
the show commands.
Related
•
Commands
•
•

show iscsi session detailed

Display detailed information on active iSCSI sessions on the switch.
S4810
Syntax
show iscsi session detailed [session isid]
Parameters
isid
950
Introduced on the S4820T.
Introduced on the S4810.
Introduced on MXL 10/40GbE Switch IO Module.
show iscsi — displays the currently configured iSCSI settings.
show iscsi session detailed
sessions on the switch.
show run iscsi — shows run iscsi.
Enter the session's iSCSi ID to display detailed information
about the specified iSCSi session.
— displays detailed information about active iSCSI
iSCSI Optimization