Dell S4810 Reference Manual page 1052

Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.2.1.1
Usage The following describes the show vlan command shown in the following
Information example.
Column Heading
(Column 1 — no
heading)
NUM
Status
Q
Ports
Example
Dell#show vlan
Codes: * - Default VLAN, G - GVRP VLANs, P - Primary, C -
Community, I - Isolated
1052
Introduced on the S-Series and revised the output to display
Native VLAN.
Introduced on the C-Series.
Introduced on the E-Series.
Description
• asterisk symbol (*) = Default VLAN
• G = GVRP VLAN
• P = primary VLAN
• C = community VLAN
• I = isolated VLAN
• O = OpenFlow
Displays existing VLAN IDs.
Displays the word Inactive for inactive VLANs and the word
Active for active VLANs.
• Displays G for GVRP tagged
• M for member of a VLAN-Stack VLAN
• T for tagged interface
• U for untagged interface
• x (not capitalized x) for Dot1x untagged
• X (capitalized X) for Dot1x tagged
• o (not capitalized o) for OpenFlow untagged
• O (capitalized O) for OpenFlow tagged
• H for VSN tagged
• i (not capitalized i) for Internal untagged
• I (capitalized I) for Internal tagged
• v (not capitalized v) for VLT untagged
• V (capitalized V) for VLT tagged
Displays the type, slot, and port information.
• Po = port channel
• Gi = gigabit Ethernet
• Te = ten-gigabit Ethernet
Layer 2