Default Logging Buffered - Dell S4810 Reference Manual

The following is a list of the Dell Networking OS version history for this command.
Version 9.5(0.0)
Example
Dell(conf)#clear logging auditlog
Related show logging auditlog
Commands

default logging buffered

Return to the default setting for messages logged to the internal buffer.
S4810
Syntax
default logging buffered
Defaults size = 40960; level = 7 or debugging
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 7.6.1.0
Version 7.5.1.0
E-Series legacy
command
Related logging buffered
Commands
default logging console
Return the default settings for messages logged to the console.
S4810
Syntax
default logging console
Defaults level = 7 or debugging
1582
Introduced on the S4810, S4820T, S6000, Z9000, and MXL.
— displays audit log
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S-Series.
Introduced on the C-Series.
— sets the logging buffered parameters.
Simple Network Management Protocol (SNMP) and Syslog