Show Mac Learning-Limit - Dell S4810 Reference Manual

Hide thumbs Also See for S4810:

Table of Contents

MAC Accounting information can be accessed using SNMP via the Force10 Monitor

MIB. For more information about enabling SNMP, refer to the Dell Networking OS

Configuration Guide.

Dell-1#sh mac accounting destination interface gigabitethernet

00:44:00:00:00:02

00:44:00:00:00:01

00:22:00:00:00:00

00:44:00:00:00:02

00:44:00:00:00:01

show mac accounting access-list

and counters (if configured).

show mac learning-limit

Display MAC address learning limits set for various interfaces.

show mac learning-limit [violate-action] [detail] [interface

violate-action

NOTE: Currently, the Force10 MONITOR MIB does not return the MAC

addresses in an increasing order using SNMP. As a workaround, you can use

the -C c option in snmpwalk or snmpbulkwalk to access the Force10

MONITOR MIB. For example: % snmpwalk -C c -v 2c -c public 133.33.33.131

enterprise.6027.3.3.3

(OPTIONALY) Enter the keywords violate-action to

display the MAC learning limit violation status.

(OPTIONAL) Enter the keyword detail to display the MAC

learning limit in detail.

(OPTIONAL) Enter the keyword interface with the

following keywords and slot/port or number information:

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

For a Port Channel interface, enter the keywords port-

channel then a number. The range is from 1 to 128.

EXEC Privilege

Packets Bytes

— displays the MAC access list configurations