Protocol-Tunnel Enable - Dell S4810 Reference Manual

Defaults The default destination MAC is 01:01:e8:00:00:00.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
Version 7.4.1.0
Usage When you enable VLAN-Stacking, no protocol packets are tunneled.
Information
Related show protocol-tunnel
Command

protocol-tunnel enable

Enable protocol tunneling globally on the system.
S4810
Syntax
protocol-tunnel enable
To disable protocol tunneling, use the no protocol-tunnel enable command.
Defaults Disabled.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
1538
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series, and S-Series.
Introduced
— displays tunneling information for all VLANs.
Introduced on the S6000.
Introduced on the S4820T.
Service Provider Bridging