Max-Age - Dell S4810 Reference Manual

max-age

information.
max-age
To maintain configuration information before refreshing that information, set the time interval for the
MSTB.
S4810
Syntax
max-age seconds
To return to the default values, use the no max-age command.
Parameters
max-age
Defaults 20 seconds
Command MULTIPLE SPANNING TREE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
Version 6.5.1.0
Related
forward-delay
Commands
the Learning State before transitioning to the Forwarding State.
hello-time
1120
— changes the wait time before MSTP refreshes protocol configuration
Enter a number of seconds the Dell Networking OS waits
before refreshing configuration information. The range is
from 6 to 40. The default is 20 seconds.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced.
— the amount of time the interface waits in the Blocking State and
— changes the time interval between BPDUs.
Multiple Spanning Tree Protocol (MSTP)